ClimateRight CR-2550 Uživatelský manuál Strana 203

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 349
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 202
CHAPTER 6
6-60
6. Hold the rocker switch on for 45 seconds. Turn the engine off and
then release the switc
h.
7. Check the reservoir, the uid level should have dropped 1/4”.
If the reservoir does not drop 1/4” it may be necessary to repeat steps
1-6. Run the engine at 1500-2000 rpm”s to help begin the uid ow.
For normal operation, run engine at idle.
8. If the uid is still not owing from the reservoir, check as follows:
a. Hoses for knicks and leaking clamps.
b. Check the vent hole in the reservoir cap for blockage.
c. Check that the solenoid opens when the switch is on and key is in
run position.
d. Check the fuse.
e. Check the solenoid connection.
f. Check for a secure ground connection.
CHAPTER 6
6-60
6. Hold the rocker switch on for 45 seconds. Turn the engine off and
then release the switc
h.
7. Check the reservoir, the uid level should have dropped 1/4”.
If the reservoir does not drop 1/4” it may be necessary to repeat steps
1-6. Run the engine at 1500-2000 rpm”s to help begin the uid ow.
For normal operation, run engine at idle.
8. If the uid is still not owing from the reservoir, check as follows:
a. Hoses for knicks and leaking clamps.
b. Check the vent hole in the reservoir cap for blockage.
c. Check that the solenoid opens when the switch is on and key is in
run position.
d. Check the fuse.
e. Check the solenoid connection.
f. Check for a secure ground connection.
Zobrazit stránku 202
1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 348 349

Komentáře k této Příručce

Žádné komentáře